{"id":1579,"date":"2017-10-05T15:41:07","date_gmt":"2017-10-05T14:41:07","guid":{"rendered":"https:\/\/engineernewsnetwork.com\/blog\/?p=1579"},"modified":"2017-10-05T15:59:45","modified_gmt":"2017-10-05T14:59:45","slug":"self-clinching-stainless-steel-flush-nuts-for-thin-metal-sheets","status":"publish","type":"post","link":"https:\/\/www.engineernewsnetwork.com\/blog\/self-clinching-stainless-steel-flush-nuts-for-thin-metal-sheets\/","title":{"rendered":"Self-clinching stainless steel flush nuts for thin metal sheets"},"content":{"rendered":"
\"\"<\/a>
National Flooring Equipment\u2019s shot blasters are efficient in surface preparation as they can strip older coatings, clean and profile a floor in a single step<\/figcaption><\/figure>\n

PEMSERT self-clinching flush nuts from PennEngineering<\/a><\/span> suit attachment applications where a thin metal sheet requires load-bearing threads stronger than tapped holes but must remain flat without any protrusions on either side of the sheet.<\/p>\n

They can be installed before sheet bending and forming to provide threads for mating hardware in sections that otherwise would be inaccessible for fastener installation after chassis are formed.<\/p>\n

Their uniquely hexagonal head and clinch technology ensures high axial and torsional strength in service.<\/p>\n

Ultimately, the nuts install permanently, will never loosen or fall out, and leave surfaces unmarred to enhance the functional and cosmetic qualities of assemblies.<\/p>\n

The product line includes PEMSERT F 300 Series stainless steel types for installation into steel or aluminum sheets and PEMSERT F4 heat-treated 400 Series stainless steel versions specifically designed for installation into 300 Series stainless steel sheets.<\/p>\n

Both types are available in thread sizes #2-56 through \u00bc-20 and M2 through M6. Sheets can be as thin as .060-in\/1.53mm.
\n