{"id":2549,"date":"2017-11-17T08:24:25","date_gmt":"2017-11-17T08:24:25","guid":{"rendered":"https:\/\/engineernewsnetwork.com\/blog\/?p=2549"},"modified":"2017-11-17T08:24:25","modified_gmt":"2017-11-17T08:24:25","slug":"improving-the-efficiency-of-existing-boilers","status":"publish","type":"post","link":"https:\/\/www.engineernewsnetwork.com\/blog\/improving-the-efficiency-of-existing-boilers\/","title":{"rendered":"Improving the efficiency of existing boilers"},"content":{"rendered":"
\"\"<\/a>
ThermTech replace old unit with new economiser at Leeds University Hospital<\/figcaption><\/figure>\n

Oil and gas-fired boilers have been providing the heating requirements for many industrial and commercial premises for over 100 years.<\/p>\n

In that time the energy efficiency of these installations has increased steadily, however there is a way to significantly reduce energy consumption that is still not universally applied and yet has a typical payback period of less than 18 months.<\/p>\n

Boilers will always lose some degree of the heat generated through the chimney, but minimising this loss and making more efficient use of the energy conversion can reduce both costs and carbon emissions.<\/p>\n

One of the most cost effective solutions uses this waste heat to increase the temperature of the boiler feed water, thereby reducing the amount of energy required to bring the water up to operating temperature.<\/p>\n

Creating the right design<\/strong><\/p>\n

Flue gas economisers are positioned between the boiler and the chimney and transfer the heat of the exhaust gas to the boiler feed water which flows through finned tubes. The efficiency of this heat transfer depends on the design of the tubes and the flowrate of the water.<\/p>\n

As businesses look to minimise overheads and also improve their environmental credentials, installing a retro-fit economiser on an existing boiler circuit can deliver a major step in the right direction.<\/p>\n

Furthermore, a system that has been correctly designed and installed can often recover the initial costs within 18 months.<\/p>\n

In order to achieve the greatest benefit from these systems it is essential to work with an experienced manufacturer<\/a><\/span> that can create bespoke designs that take into account the characteristics of a particular application.<\/p>\n

Neil English, Managing Director at ThermTech<\/a><\/span>, which specialises in tailor-made economisers, explains: \u201cEvery application is unique in some way, so it is very important to carefully assess the existing boiler system and then design the most suitable economiser that can be easily retro-fitted. Very often there will be multiple boilers involved and ideally the economisers should be installed without affecting the normal operation of the system.\u201d
\n