Home / Electronics / Ultra-low quiescent wide input voltage LDO addresses needs of 12V and 24V automotive systems

Ultra-low quiescent wide input voltage LDO addresses needs of 12V and 24V automotive systems

The AP7387Q

Diodes Incorporated has introduced the AP7387Q low dropout (LDO) linear voltage regulator. Delivering a maximum output current of 150mA, this device has a wide input voltage of 5V to 60V, and a dropout voltage of 700mV (typical) at a 100mA output current. It provides engineering teams with a simple-to-implement point-of-load (PoL) solution for automotive audio, navigation, tail lights, transmission control units, and battery management systems.

The AP7387Q’s quiescent current is just 2µA — lower than many competing devices. This is essential in systems that are permanently connected to a battery, helping to extend runtime. In addition, with a high-power supply rejection ratio (PSRR) of 70dB at 1kHz, the device is optimized for noise-sensitive functions. The LDO also exhibits a fast line/load transient response against rapid changes to the input voltage or load current.

Thanks to its wide input voltage, the AP7387Q meets the load dump specifications of 12V internal combustion engine (ICE) vehicles such as cars, 24V ICEs such as buses, coaches, and trucks. 

Check Also

Advanced mass spectrometry power supplies to enable faster, high resolution molecular analysis

XP Power announces the release of its application-specific Mass Spectrometry power supplies, the MS Source …

Retimers address latency and signal‑Integrity challenges in AI data centres

As AI workloads continue to scale, data centre architects are increasingly constrained by limited signal …

3.3kV HV‑D3 mSiC power modules to enable solid-state transformers for AI data centres

Microchip Technology announces the availability of its new 3.3 kV HV‑D3 mSiC Power Modules, designed …