Home / Process / 20-output PCIe clock buffers for next-generation servers, data centres, storage and PCIe

20-output PCIe clock buffers for next-generation servers, data centres, storage and PCIe

Reduces power consumption with Low-Power High-Speed Current Steering Logic (LP-HCSL)

Microchip announces four new 20-output differential clock buffers that exceed PCIe Gen 5 jitter standards for next-generation data centre applications.

The ZL40292 (85Ω termination) and ZL40293 (100Ω termination) are specifically designed to meet the new DB2000Q specification while the ZL40294 (85Ω termination) and ZL40295 (100Ω termination) are designed to meet the DB2000QL industry standard. These new devices also meet PCIe Gen 1, 2, 3 and 4 specifications. 

Each buffer is an ideal complement to chipsets where distributed clocks are required across several peripheral components, such as Central Processing Units (CPUs), Field Programmable Gate Arrays (FPGAs) and Physical layers (PHYs) in data centre servers and storage devices, along with many other PCIe applications. 

The devices’ low additive jitter of approximately 20 femtoseconds (~20 fs) far exceeds the DB2000Q/QL specification of 80 femtoseconds (80 fs). This provides designers large margins to meet tight timing budgets while achieving increasing data rates.

These devices will minimise jitter when distributing clocks to up to 20 outputs, thereby maintaining the integrity and quality of the clock signal through the buffer. 

The new buffers achieve low power dissipation and contribute significant savings to power budgets by using Low-Power High-Speed Current Steering Logic (LP-HCSL). Compared to standard HCSL, LP-HCSL consumes one third of the power, leading to a significant decrease in power consumption. This feature also gives customers the ability to drive longer traces on their board, improving signal routing while reducing components and board space. 

The ZL40292, for example, can eliminate up to 80 termination resistors (four per output) compared to traditional HCSL buffers.

The ZL40292 and ZL40293 are available now for sampling and in volume production in 72-pin 10 x 10mm QFN packages. The ZL40294 and ZL40295 are available now for sampling in the 80-pin 6 x 6 QFN packages.

Check Also

Filter bags with internal pre-filter for efficient and safe separation of particles and oil

Whether paints and coatings, chemicals, or process water – there are high requirements for the …

High-temperature 3D print filtration technology

BOFA’s 3D PrintPRO HT is focused on 230V markets and filters high-temperature particulate, gases and …

Miniature metric ball screws provide high load capacity in a small footprint  

Thomson Industries has announced the availability of new German-engineered and manufactured miniature precision ball screw …