Home / Electronics / Bidirectional 8-channel level shifter

Bidirectional 8-channel level shifter

The 8-bit PI4ULS5V108 is available in the 20-pin TSSOP, or 20-pin VQFN 2.5mm x 4.5mm packages
Diodes Incorporated announces the PI4ULS5V108, an 8-channel, high speed, bidirectional level shifter designed for inter-IC communications between devices operating on different voltage supply rails.

Targeted applications include PC, servers, networking, telecom, and consumer electronics.



The PI4ULS5V108 supports up to 100 MHz up-translation and greater than 100 MHz down-translation at ≤30pF capacitive load.

This allows it to support a wide range of PC or consumer interfaces including GPIO, MDIO, SDIO, UART, SMBus, PMBus, I2C, and SPI.

It provides voltage level shifting without direction pin control, which minimises system effort. This level shifter operates between <0.9V and 5V across eight I/O channels, each of which can be configured with different voltage translation levels for system flexibility.

On-resistance is very low, yielding minimal signal distortion, while the wider translation voltage range of the PI4ULS5V108 suits consumer interfaces. Enable and I/O pins are ESD protected (8kV HBM and 1kV CDM).

The 8-bit PI4ULS5V108 is available in the 20-pin TSSOP, or 20-pin VQFN 2.5mm x 4.5mm packages, both available on 13” reels. The PI4ULS5V108 is available at $1.25 in 3000 unit quantities.

Check Also

Platform engineered to maximise semiconductor manufacturing for edge AI applications

Teradyne‘s UltraFLEXplus S series is an extension of its UltraFLEXplus platform engineered to maximise output …

Thermal imaging camera delivers 1280 × 1024 HD resolution

Teledyne FLIR announces the launch of the A8481, a new compact HD MWIR science camera …

Ultra-fast AI inference at 10GSPS detects particle pile-up in real time

FPGA-based AI inference at 10 giga samples per second (GSPS) on the Teledyne ADQ35 enables …