Home / Electronics / Photorelays feature maximum turn on time of only 0.25ms

Photorelays feature maximum turn on time of only 0.25ms

Aimed at applications in testing, these space saving devices are 20% smaller than company's previous generation

Toshiba has just introduced the TLP3476S. This new photorelay has a maximum turn-on time of 0.25ms – which is a 50% reduction over the company’s existing TLP3475S photorelay and enables greatly improved switching capabilities. Available in an S-VSON4T package, it comprises a photo-MOSFET which is optically coupled with an infrared (IR) LED. With an on-state resistance of just 1.5Ω (maximum), this device delivers a 0.4A on-state current. It supports a 500Vrms isolation voltage. 

Toshiba’s TLP3476S takes up 1.45mm × 2.0mm of board space, as compared to the 60mm2 normally required by a mechanical relay. Switching power is in the order of 0.1mW, as opposed to the 100mW required to cause mechanical devices to switch. An operational temperature range of -40˚C to 110˚C is supported.

Applications for the TLP3476S include semiconductor tester equipment (high-speed memory testers, high-speed logic testers, etc.), probe cards and other types of measurement instrumentation. 

Check Also

Ultra-low-resistance devices for next-generation power density and efficiency

Nexperia announces new ultra-low-ohmic gallium nitride (GaN) FETs, expanding its low- and medium-voltage GaN portfolio …

Compact Hall effect current sensors reduce power loss and PCB space in EV charging applications

Diodes Incorporated announces the release of the AHC1724Q and AHC1725Q automotive-compliant Hall effect current sensors. …

Diode portfolio now with small package option for overvoltage protection

Toshiba has expanded its range of protection Zener diodes with the introduction of the CTZ …