Home / Electronics / Murata announces smallest RF noise filter for audio lines in portable devices

Murata announces smallest RF noise filter for audio lines in portable devices

Murata announces the NFZ03SG_SN series, an RF filter in 0201 size for audio lines in portable devices such as smartphones and tablets.

Quality of sound has become a competitive selling point in portable devices and measures must be taken to avoid distortion caused by the necessary RF filtering in audio lines.



The NFZ03SG_SN series, now in mass production, is the smallest chip filter on the market at 0201 size giving high attenuation at communication frequencies while introducing very low distortion to audio signals.

Parts within the range can be selected for typical attenuation impedances between 330 and 1600 ohms at 900MHz and between 400 and 1200 ohms at 1.7GHz.

DC resistances range between 0.6 and 1.7 ohms and rated current between 305 and 180mA.

At 0201 chip size, the filter is the smallest in the market matching the component density requirements of modern portable devices. This is achieved by proprietary ferrite and manufacturing technology.

The filter has an operating and storage temperature range of -55˚C to +125˚C.

Check Also

Self-adapting USB 2.0 signal conditioner IC saves power and simplifies system design

Diodes Incorporated announces the introduction of the PI5USB212, a USB 2.0 signal conditioner that operates …

Non-stop transmission via fieldbus 

Ifm electronic introduces Ethernet modules for field applications, the AL4xxx series. These decentralised DI modules …

Analysis of up to eight simultaneous signals, improving multi-signal analysis capabilities for engineers

Tektronix, Inc announces the release of its SignalVu Spectrum Analyzer Software, Version 5.4, for multi-channel …