Home / Electronics / Bidirectional 8-channel level shifter

Bidirectional 8-channel level shifter

The 8-bit PI4ULS5V108 is available in the 20-pin TSSOP, or 20-pin VQFN 2.5mm x 4.5mm packages
Diodes Incorporated announces the PI4ULS5V108, an 8-channel, high speed, bidirectional level shifter designed for inter-IC communications between devices operating on different voltage supply rails.

Targeted applications include PC, servers, networking, telecom, and consumer electronics.



The PI4ULS5V108 supports up to 100 MHz up-translation and greater than 100 MHz down-translation at ≤30pF capacitive load.

This allows it to support a wide range of PC or consumer interfaces including GPIO, MDIO, SDIO, UART, SMBus, PMBus, I2C, and SPI.

It provides voltage level shifting without direction pin control, which minimises system effort. This level shifter operates between <0.9V and 5V across eight I/O channels, each of which can be configured with different voltage translation levels for system flexibility.

On-resistance is very low, yielding minimal signal distortion, while the wider translation voltage range of the PI4ULS5V108 suits consumer interfaces. Enable and I/O pins are ESD protected (8kV HBM and 1kV CDM).

The 8-bit PI4ULS5V108 is available in the 20-pin TSSOP, or 20-pin VQFN 2.5mm x 4.5mm packages, both available on 13” reels. The PI4ULS5V108 is available at $1.25 in 3000 unit quantities.

Check Also

Moulded case circuit breaker

LS ELECTRIC America‘s Susol UL Moulded Case Circuit Breaker (MCCB) is an advanced low-voltage platform for …

How high-resistance grounding keeps data centres online

Mike Torbitt explores how neutral earthing resistors enable data centres to treat first earth faults …

40V eFuse ICs for power line circuit protection in industrial and consumer applications

Toshiba expands its electronic fuse (eFuse) lineup with the introduction of the 40V TCKE6 series. …