Home / Electronics / Low dropout regulator offers high PSRR in small footprint for noise-sensitive applications

Low dropout regulator offers high PSRR in small footprint for noise-sensitive applications

The AP7353 delivers the voltage and current levels demanded by the latest electronic devices now being deployed into the IoT, up to 4.5V at 250mA

Diodes Incorporated announces the AP7353 low dropout regulator, which offers a high power supply rejection ratio (PSRR) in a small package, meeting the need for voltage regulation in noise-sensitive, battery-operated devices such as wearables, portables, and connected sensors.

The AP7353 is available in X1-WLB0707-4 (Type A1) and X2-DFN1010-4 (Type B) packages, each measuring less than 1mm on each side. These dimensions result in a small footprint that supports densely populated printed circuit board layouts. 

Despite its size, the AP7353 delivers the voltage and current levels demanded by the latest electronic devices now being deployed into the IoT, up to 4.5V at 250mA. 

A PSRR of 90dB at 1kHz and low quiescent current of 18μA make the AP7353 particularly suitable for battery-powered devices that include noise-sensitive analog circuits or RF interfaces. 

The AP7353’s high PSRR and its 10µV wideband noise voltage help support a high signal-to-noise ratio. These attributes position the AP7353 as a leading low-dropout (LDO) regulator in this application space.

The AP7353’s enable pin allows the LDO regulator to be put into standby mode when not required. 

For improved robustness, short-circuit and overtemperature protection are also included. An AP7353D version is available that discharges the output when disabled.

Operating from a wide input voltage range of between 2.0V and 5.5V, the AP7353 has a fixed output voltage of between 1.8V and 4.5V with an accuracy of ±1% and line regulation of 0.001%/mA when supplying an output current from 1mA to 250mA.

Check Also

Compact panel mounted voltage measurement

Compact panel mounted voltage measurement

LEM introduces the DVC 1000 series of voltage sensors for insulated nominal voltage measurements in …

Low voltage automotive buck converter from

Low voltage automotive buck converter

Diodes Incorporated announces the AP61100Q, a 5.5V, 1A continuous output current, automotive-compliant, synchronous buck converter …

Asymmetrical output, isolated Dc-Dc converters

Asymmetrical output, isolated Dc-Dc converters

CUI Inc announces the addition of four isolated converters to its isolated dc-dc converter line.  …