Home / Process / Pump offers high flow at low to medium pressures in a small compact package

Pump offers high flow at low to medium pressures in a small compact package

The TORNADO T1 Generation F pump

Netzsch Pumps‘ TORNADO T1 Generation F pump is designed to produce high flow at low to medium pressures in a small compact package. It is suitable for applications in wastewater treatment. The TORNADO T1 Generation F pump can handle a wide range of viscosities, solids, temperature, abrasion, and corrosive/acidic process fluids and environments.

The TORNADO T1 Generation F pump is extremely versatile for just about any orientation and installation. Its robust design offers longevity, operational flexibility, and dry-run capabilities. It allows the pump to operate and handle many upset process conditions without causing harm to the pump. The pumps are available up to over 4000gpm and up to 130psi.

Netzsch TORNADO T1 Generation F is a Full Service-in-Place (FSIP) pump. The front pullout design allows for easy access for maintenance and inspection. Opening the front cover allows access to the wear plates, lobes, and seals, making this pump very easy to service. There is no need to access the timing gears or bearing as they are protected with the Netzsch Gearbox Security System (GSS). This desirable feature protects the gearbox from the process side of the pump (wet-end).

The GSS is an air gap that exists between the mechanical seal and the lip seal of the timing gearbox that establishes a physical separation between them. Should the mechanical seal leak, no product can get into the pump’s gearbox to contaminate the timing gear oil.

The air gap allows for the process fluid to drip away from the shaft and timing gearbox to prevent damage; the process fluid physically cannot pass through the air gap and migrate past the gearbox lip seal. This air gap fully prevents the intermingling of the two fluids resulting in improved long-term operation and allows for the pump to have lower total cost of ownership. Repairing bearings, lip seals and timing gears are greatly diminished with the TORNADO T1 Generation F rotary lobe pumps.

Check Also

Pressure valves for flexible control for high-precision manufacturing

Emerson announces the new AVENTICS Series 625 Sentronic Proportional Pressure Control Valves. With a control …

Industrial signal conversion 

ifm’s range of converter plugs is available for both industrial and hygienic applications, housed in …

Overcoming the challenges of inline thickness measurement

When selecting an in-process thickness measurement system, a number of challenges need to be considered, …