Home / Process / 48-volt electric linear actuator improves energy efficiency of medium-duty applications 
The Electrak MD 48V actuator

48-volt electric linear actuator improves energy efficiency of medium-duty applications 

Thomson Industries has announced that its Electrak MD actuator now has a 48V rating. The availability of a 48V actuator that can handle loads of up to 2kN (about 450lbs.) equips battery powered system designers with energy efficiency, cable management and control capability that might otherwise require larger, more expensive actuators. 

The new voltage standard

Battery technology has been improving significantly in both power and density, with 48V batteries now standard in material handling and agricultural applications. By achieving comparable load handling with a dramatically lower current draw, designers can enjoy the following benefits:

Improved energy efficiency, which lowers costs and reduces heat 

Reduced cabling costs and simplified cable management, by allowing thinner cables

Longer distance deployment, reducing voltage dropoff by as much as 10 times

Higher controllability through more efficient integration involving CANopen, SAE J1939 and smart features such as position feedback.

Expanded applications

The Electrak MD 48V actuator enables advanced motion control wherever 48 V batteries are in use. This is especially valuable today in logistics and material handling applications such as forklifts and AGVs, which are both operator-driven and autonomous.

Agricultural equipment is another area of application. Actuators in electric power takeoff (ePTO) mechanisms on modern tractors, for example, help transfer power from tractors to other vehicle equipment, and the low current demand makes the entire system more efficient. Similarly, the low current demand could improve the efficiency of automated harvesting systems. 

The perfect fit

The availability of the Electrak MD 48V completes Thomson’s power options. Designers now have greater flexibility to mix and match 12 V, 24V and 48V-rated actuators to move loads of up to 25kN, without having to configure subsystems such as DC converters.

“If you have automation on six or seven axes, each drawing about five amps, you may still need to design for 100 amps inrush for the motors, leaving little room to run actuators for ancillary functions such as adjustments and locking. With the Electrak MD 48V, you can make everything fit without having to reconfigure for a larger system than you need,” said Anders Karlsson, Senior Product Manager – Linear Actuators at Thomson.

Check Also

Visualising papermaking efficiency and control

Recent developments in thermal signature analytics have expanded the applications of thermal cameras beyond routine …

Disposable or reusable: designing a motion system for medical devices

From driving a pump to actuating an injector, medical devices that provide patient treatment rely …

The benefits of residual current monitoring in critical applications

According to the International Energy Agency, global internet traffic has increased by 15 times since …