Home / Electronics / Ultra-high power density charger solution

Ultra-high power density charger solution

The AP3306 is an active clamp flyback (ACF) controller

Diodes Incorporated has launched a three-chip solution for enhancing the performance of ultra-high-power-density USB Type-C power delivery (PD) systems. These products can be used in a wide variety of consumer electronics applications, including smartphone chargers and notebook adapters.

The AP43771V USB Type-C PD decoder is compatible with PD3.0, PPS Rev 3.0, V1.2 (TID – 4305), and Qualcomm Quick Charge QC4/QC4+/QC5 (QC20201127203) protocols. It supports a 3.3V to 24V operating voltage range and incorporates both a one-time programmable (OTP) ROM for all the main firmware, and a multi-time programmable (MTP) ROM to accommodate user configuration data.

With I2C and GPIO pins and built-in application firmware, the AP43771V backs various intelligent power management systems during charging states. These include smart power-sharing among multiple charging ports, thermal power de-rating, LED light indication, and fault indication.

The AP3306 is an active clamp flyback (ACF) controller that reaches elevated operational efficiency via zero voltage switching (ZVS) and magnetic energy recycling. It can be used with an integrated driver GaN FET, a Cascode GaN FET, or a MOSFET serving as the main low-side switch. With integrated high-side ACF gate driver control, the AP3306 supports leakage energy recycling circuitry via a reduced-current-capability high-side MOS switch. This high degree of integration and use of cost-effective components reduces bill-of-material (BOM) costs and board space.

The APR340 is a secondary-side synchronous rectification (SR) MOSFET driver optimised for use with the AP3306. It features a built-in pulse linear regulator and operates in constant current (CC) mode to safeguard the charging system. The system output voltage can go as low as 2V, which is a significant benefit in programmable power supply (PPS) applications.

The AP43771V is available in both W-DFN3030-14 and W-QFN4040-24 package options. The AP3306 is supplied in a SO-10 package format, while the APR340 comes in a SOT26 package.

Check Also

Ex pressure transmitter for demanding industrial applications

Trafag‘s intrinsically safe EXNT 8292 Ex Pressure Transmitter is designed to deliver reliability and safety in …

Mid-amp circuit breakers

Wesgarde‘s Optifuse 641, 642, and 643 Mid-Amp Circuit Breakers are engineered for rugged performance and compact versatility. The 641, …

Custom ICs enhance energy efficiency

According to the International Energy Agency, industrial energy consumption makes up nearly one-third of global …