Home / Design / Drives for bulk goods conveying
MAXXDRIVE XT industrial gear units are tailored to applications where high powers with low speed ratios are required Image: NORD DRIVESYSTEMS

Drives for bulk goods conveying

With regard to the requirements for conveyor technology drives in the bulk goods and mineral industries, NORD DRIVESYSTEMS specially developed the MAXXDRIVE XT industrial gear unit. It provides output torques of 15 to 75kNm with speed ratios from 6.3 to 22.4 and is offered in seven sizes for powers from 22 to 2,100kW. 

Low speed ratios, high powers

The power and speed ranges of the two-stage right-angle gear unit have been specially designed for industries in which low speed ranges are required in combination with high powers – such as the bulk goods and mineral industries. Its robust design makes the MAXXDRIVE XT resistant to dirt and reliable in rough operating conditions. A special sealing concept reduces maintenance. Large roller bearings and centre distances increase the load capacity and service life of the components.

As standard, the industrial gear unit is equipped with a heavily ribbed UNICASE housing and an integrated axial fan. Due to the increased surface and the airflow covers, the cooling airflow is optimised and a very high thermal limiting power is achieved. In many cases, additional cooling is not required. 

Customised planning

“As with other application areas, our drive solutions for the industry are individually configured for customers according to the modular principle,” says Jörg Niermann, Head of Marketing at NORD DRIVESYSTEMS. This is based on a comprehensive range of frequency inverters, motors and gear units, as well as coupling and brake systems, each with a wide variety of options. Features such as hydraulic couplings tailored to the particular process or Taconite seals, which effectively protect radial shaft seals against abrasive dust and corrosion, ensure smooth operation.

NORD also offers innovative predictive maintenance concepts for heavy industrial gear units. NORD drives networked via the frequency inverter communicate their status data via the control system or directly into a secure Cloud. With optional vibration monitoring, condition changes can be detected at an early stage and predictive maintenance can be scheduled in good time. Performance data recording also ensures optimal system dimensioning as well as continuous condition monitoring (Condition monitoring) of the drives. 

MAXXDRIVE XT industrial gear units are tailored to applications where high powers with low speed ratios are required Image: NORD DRIVESYSTEMS

Check Also

Inner or outer? Rotor position specification for miniature DC motors

To get the most from miniature motion technology, a key design specification is whether to …

Polycarbonate enclosures protect crane control architecture in corrosive atmospheres

Galvanising plants need heavy lifting capabilities, but these systems must be able to endure an …

Firmware enables faster drive-to-drive communication and more flexible exchange of CANopen process data

The COMBIVERT F6 and S6 drive controllers from KEB Automation are now available with new …