Home / Electronics / Liquid level switches support higher supply voltages and temperatures

Liquid level switches support higher supply voltages and temperatures

Strengthening its widely-used Optomax portfolio of accurate, cost-effective and reliable infra-red (IR) liquid level switches, SST Sensing Ltd now offers the Optomax Industrial series.

These devices offer the same functionality and operational performance as customers have come to expect from standard Optomax switches, but with the added advantage of greater overall electrical robustness and flexibility.



They are capable of accepting supply voltages from 4.5VDC to 15.4VDC or 8VDC to 30VDC and have built-in protection against over-voltage, reverse polarity, and the presence of voltage transients or electrostatic discharge strikes.

Delivering an output current of up to 1A, they can be used to directly activate alarm beacons, relays, pumps and motors within the system – so that reactive measures can be taken.

A broad variety of electronic output configurations are available, to meet specific application requirements.

The liquid level switches can deal with pressure levels up to 20bar.

In addition, industrial operating temperature ranges are supported – standard models covering -25 to 80°C and extended versions spanning all the way from -40 to 125°C.

These devices have compact dimensions, measuring as little as 33.8mm in length, and come in a choice of M12, ½”-20 UNFand 1/4” NPTthread options.

They are supplied in two different chemically-resistant, anti-corrosive housing options, with Polysulfone being used for the majority of applications and Trogamid being employed mainly in tasks such as food and beverage processing.

The proprietary Optomax liquid level sensing circuit developed by SST consists of an IR LED and a phototransistor, accompanied by a microcontroller unit.

The strength of the IR signal passing between the LED and the phototransistor alters when liquid comes into contact with the sensor tip – thereby providing a rapid and highly precise method to determine the presence of liquid (even in the smallest of quantities) or its or absence.

The switches’ output signals can be set ‘high’ in order to correspond either to a wet or a dry state, as is most appropriate for the application and connected circuitry.

As this mechanism is based on a solid-state arrangement, with no moving parts involved, it is much more reliable than alternative solutions (such as float switches).

Optomax devices are, as a result, not subject to mechanical wear and tear, nor are they susceptible to jamming issues.

Check Also

Ultra-low-resistance devices for next-generation power density and efficiency

Nexperia announces new ultra-low-ohmic gallium nitride (GaN) FETs, expanding its low- and medium-voltage GaN portfolio …

Compact Hall effect current sensors reduce power loss and PCB space in EV charging applications

Diodes Incorporated announces the release of the AHC1724Q and AHC1725Q automotive-compliant Hall effect current sensors. …

Diode portfolio now with small package option for overvoltage protection

Toshiba has expanded its range of protection Zener diodes with the introduction of the CTZ …