Home / Electronics / 65V, 2A automotive-compliant synchronous Buck LED driver for lighting applications

65V, 2A automotive-compliant synchronous Buck LED driver for lighting applications

Comprehensive protection and fault reporting

Diodes Incorporated announces the expansion of its automotive-compliant* LED driver portfolio by introducing the AL8891Q. This synchronous Buck LED driver with high-side current sense drives up to 2A from a wide 4.5V to 65V input voltage range. It supports up to 95% duty cycle, allowing the drive of longer LED chains. The device provides a flexible, high-efficiency solution for automotive lighting applications, including daytime running lights (DRL), fog lights, turn lights, brake/stop lights, and interior lights.

Using constant-on-time (COT) control, the AL8891Q achieves simple control-loop compensation and cycle-by-cycle current limiting with a fast transient response without requiring an external compensation capacitor. The device’s switching frequency is adjustable from 200kHz to 2.5MHz, allowing it to optimise efficiency or achieve a smaller inductor size and compact form factor. It incorporates a spread spectrum frequency modulation technique to enhance EMI performance, which eases compliance with the most stringent CISPR 25 Class 5 standard.

The AL8891Q has two independent pins – PWM and analogue dimming – for enhanced functionality. PWM dimming, from 0.1kHz to 2kHz, is suitable for high-resolution dimming, and analogue dimming is from 0.15V to 2V. It features an internal soft-start function, gradually increasing the inductor and switch current to minimise potential overvoltage and overcurrent at the output.

The device features comprehensive protections with fault reporting, including thermal shutdown with auto-restart, input and constant current undervoltage lockout (UVLO), cycle-by-cycle current limit, and LED-open and short circuit protection to help increase system robustness.

Automotive-compliant – qualified to AEC-Q100 Grade 1, manufactured in facilities certified to IATF 16949, supporting PPAP documents.

Check Also

Ultra-low-resistance devices for next-generation power density and efficiency

Nexperia announces new ultra-low-ohmic gallium nitride (GaN) FETs, expanding its low- and medium-voltage GaN portfolio …

Compact Hall effect current sensors reduce power loss and PCB space in EV charging applications

Diodes Incorporated announces the release of the AHC1724Q and AHC1725Q automotive-compliant Hall effect current sensors. …

Diode portfolio now with small package option for overvoltage protection

Toshiba has expanded its range of protection Zener diodes with the introduction of the CTZ …