Home / Electronics / Aluminum electrolytic capacitors
Aluminum electrolytic capacitors
TDK offers new snap-in aluminum electrolytic capacitors with outstanding ripple current capability

Aluminum electrolytic capacitors

TDK Corporation presents the new EPCOS aluminum electrolytic capacitor series B43548* with snap-in terminals. The capacitors feature an excellent maximum ripple current capability of 9.80A (400V, 100 Hz, 60°C). This makes them ideal for demanding applications in power electronics. 

The capacitors are designed for a maximum operating temperature of 105°C, have a rated voltage range of 400V to 500V and reach under these conditions a useful life time of 3000h. Depending on the rated voltage, they offer a capacitance range of 68µF to 82 µF in case sizes of 25mm x 25mm to 35mm x 55mm (d x l). A special feature of the series is the high level of resilience against rapid charging and discharging cycles.

With their outstanding ripple current capability, these capacitors are ideal for use in frequency converters, industrial power supplies, UPS systems, medical devices and photovoltaic inverters. Thanks to their robustness in relation to rapid charging and discharging cycles, they also meet the demanding requirements of servo drive applications.

Check Also

Multitester for basic electrical measurements

Multitester for basic electrical measurements

The new Megger MET1000 has been designed specifically to meet the needs of electricians and …

What are the benefits of composite EV battery enclosures?

What are the benefits of composite EV battery enclosures?

Jari Sopanen explains how composite EV battery enclosures could support the overall light-weighting mission, and …

Programmable power supplies address EV and hydrogen production applications

Programmable power supplies address EV and hydrogen production applications

TDK Corporation announces the introduction of 50V, 400V and 500V output models to the TDK-Lambda …