Home / News, Views and Opinion / CES 2018: CMOS digital image sensor

CES 2018: CMOS digital image sensor

ON Semiconductor has announced a new 1/3.2-inch Back Side Illuminated (BSI) 4 Megapixel (MP) CMOS digital image sensor

The AR0430 – launched at Consumer Electronics Show, Las Vegas – delivers 120 frames-per-second (fps) performance supporting slow-motion video in 4 MP mode.



The sensor’s embedded functionality allows customers to capture a colour image and simultaneous depth map from a single device; a feature that is normally only possible when using a second sensor for independent depth mapping.

The AR0430 is ideal for use in Internet of Things (IoT) applications including wearable devices, AR/VR products and other designs including video doorbells and security cameras.

The design and feature set of the new image sensor resulted in its selection as an Awards Honoree in the Embedded Technologies category of the CES 2018 Innovation Awards.

Simultaneous video and depth mapping is enabled by ON Semiconductor’s Super Depth technology.

Techniques in the sensor, Colour Filter Array (CFA) and the micro-lens create a data stream containing both image and depth data.

This data is combined via an algorithm to deliver a 30fps video stream and depth map of anything within one meter of the camera. This allows capabilities such as interpretation of hand gestures to control smart IoT devices as well as the creation of simple 3D models for AR/VR use.

The AR0430 has an active-pixel array of 2316 (H) x 1746 (V), giving a 4:3 aspect ratio.

The device offers low-power performance of just 125 milliwatts (mW) when operating with a 4MP data stream at 30fps; this reduces to just 8mW in low power monitoring mode – especially valuable in battery-powered applications.

In standard imaging mode, the CMOS sensor is able to deliver high quality imaging in both daytime and night time lighting conditions, enhancing its suitability for use in security cameras.

Designers will benefit from the AR0430’s significant configuration flexibility including the ability to program gain, horizontal and vertical blanking, frame size/rate, exposure, image reversal, window size and panning.

Other features include an electronic rolling shutter, support for an external mechanical shutter, an on-chip temperature sensor for compensation, and three on-die Phase-Locked-Loops (PLLs) for super low noise performance.

Check Also

Air Gap: a critical measurement in hydroelectric generator performance

Kaman’s Static Air Gap Tool (AGT) is a portable measurement device that helps reduce downtime …

The advantages of peristaltic pumps

Tom Evans discusses how peristaltic pumps have numerous advantages over traditional pump technologies. Due to …

What data monitoring can do

Data has become a decisive factor for efficiency and competitiveness in today’s businesses. It is …