Engineer News Network The ultimate online news and information resource for today’s engineer
There are many devices and equipment mechanisms that require a light touch – delicacy rather than power is the main requirement – coupled of course to consistent reliability and longevity in service with pressures in the single digit psi range.
The Lee Spring Lite PressureT range of compression springs is a high-performance response to that need for applications such as relief/check valves, pistons, motor brushes and controls, displays, syringes, control flanges and dispensers.
The Lite PressureT compression spring series is ideal when a relatively low spring rate or workable load is needed in dimensions not normally available in a conventional compression spring. This makes the Lite PressureT series more responsive or sensitive to lighter loads than conventional compression springs.
The springs are made of passivated and ultrasonically cleaned Stainless Steel type 316 for excellent corrosion resistance.
Following the Lee Spring ex-stock catalogue policy, Lite PressureT springs are available on rapid delivery to meet this very specific need, supported as always by their custom design service when required.
